À propos de nous

Brasage d'exception depuis plus de 75 ans. Lucas-Milhaupt est un fournisseur reconnu mondialement et le fournisseur n°1 de produits et de services de brasage pour des milliers d'entreprises dans le monde entier.

Études de cas

Voyez comment nos services techniques aident les autres à résoudre leurs problèmes et à réduire leurs coûts.

Voir toutes nos études de cas

Blog

mercredi 21 novembre 2012
Calculating Ring Volume

To produce a proper braze joint, the volume of alloy used must match or exceed the volume of the joint to be brazed. The use of excess alloy adds cost and may require an additional post-machining operation. To ensure consistency in brazing, Lucas-Milhaupt has developed rings of pre-measured braze alloys for each specific application. These products ensure proper ring volume for the tube-and-fitting application, but first, the volume of the joint clearance must be properly calculated. Let’s walk through the process.

mardi 6 novembre 2012
Alloy Consumption Savings with Handy One

Alloy Consumption Savings When operators manually braze components with a torch, solid wire, and a separate brazing flux, there is a variance in the amount of brazing alloy among joints. This can result in excess alloy being consumed. Excess alloy means wasted materials, inconsistent brazing, and higher costs. Read on for a better alternative!