Acerca de Nosotros

Excelencia en Soldaduras Fuertes Durante Más de 65 Años. Lucas-Milhaupt es un proveedor mundial y productor líder de productos para uniones de metales y servicios para miles de compañías en el mundo entero.

Casos de Estudios

Ver cómo nuestros Servicios Técnicos ayudan a los demás a resolver problemas y reducir costos.

Ver todos nuestros Casos de Estudios

Blog

miércoles, 21 de noviembre de 2012
Calculating Ring Volume

To produce a proper braze joint, the volume of alloy used must match or exceed the volume of the joint to be brazed. The use of excess alloy adds cost and may require an additional post-machining operation. To ensure consistency in brazing, Lucas-Milhaupt has developed rings of pre-measured braze alloys for each specific application. These products ensure proper ring volume for the tube-and-fitting application, but first, the volume of the joint clearance must be properly calculated. Let’s walk through the process.

martes, 06 de noviembre de 2012
Alloy Consumption Savings with Handy One

Alloy Consumption Savings When operators manually braze components with a torch, solid wire, and a separate brazing flux, there is a variance in the amount of brazing alloy among joints. This can result in excess alloy being consumed. Excess alloy means wasted materials, inconsistent brazing, and higher costs. Read on for a better alternative!