A team of service personnel is readily available to assist you. Call us at 414-769-6000 - a single call can provide you with specific literature, technical assistance, price quotations, order entry, and delivery schedules.

Lucas-Milhaupt, Inc.
5656 S. Pennsylvania Ave., Cudahy, WI 53110, USA
Phone (414) 769-6000 or (800) 558-3856
Fax (414) 769-1093

Lucas-Milhaupt utilizes the advantages of Electric Discharge Machining (EDM) in the production of its dies. This capability makes for both highly accurate and low cost machining, keeping die production costs to a minimum.

Lucas-Milhaupt's chemists, metallurgists, and engineers are continuously searching for new and better ways to join both metal and non-metal assemblies. We have dedicated substantial resources to the development of customized products and processes for a wide range of applications. If you require an out-of-the-ordinary solution for your assembly, call our Technical Service department concerning your assembly problem at 414-769-6000 or fax us at 414-769-1093.

At Lucas-Milhaupt we have a Quality Control Laboratory with state-of-the art testing equipment. However, we also believe that quality cannot be tested into a product, therefore all our employees are trained in quality control techniques and are responsible for the quality of the materials they produce.

Our skilled machine operators slit strip to widths from 6" down to .062" (152.4mm to 1.57mm) and package the material on either spools or coils, depending upon your needs and production requirements.

With our extensive inventory of dies, we can respond quickly to your needs. We have over 4,000 dies available for top-quality stamped parts. We also have the ability to produce custom dies for your application. Our craftsmen produce simple, compound or progressive dies, utilizing high precision equipment to manufacture washers, discs, perforated strip and irregular configurations.

We have the ability to roll your strip thicknesses not available directly from the mills. This customized service can yield strip in widths up to 6" (152.4mm) and thicknesses down to .001" (.025mm).

Carbide and diamond dies produce wire diameters from .187" to .005" (4.75mm to .127mm). The ability to draw wire enables us to provide the optimal size filler metal for incorporation into your assemblies. You do not need to waste money and material by brazing with stock sizes of material that may be too large for your assembly. Drawing also yields round, square, half round, rectangular or unusual cross sections.

Manufactured by high speed machines, rings maintain a true radius, and may be partial turn, full turn or multiple turn. Rings inside diameter can range from 12" down to .040" and wire diameters from .125" to .008".